Intelligent 4-Cell Lithium Battery Management with CAN/LIN Interface
Created: Apr 30, 2015
No description available.
This design is a battery management circuit, which involves the use of CAN/LIN interface. The system addresses the matter about managing rechargeable batteries. This design features an 8-output hardware configurable, high side/low switch with 16-bit serial input control using the serial peripheral interface (SPI). Two of the outputs are directly controlled using a microcontroller which are applicable in pulse-width modulation. The design also features high-speed CAN interface that is use to convert digital protocol information into an analog CAN communication.
The RD9Z1-638-4Li reference design is a Battery Management System (BMS) for 4-Cell Li-Ion battery applications featuring the MM9Z1_638 Battery Sensor Module. The RD9Z1-638-4Li is built to demonstrate the product capabilities in a 4-cell Li-Ion application where high EMC performance is required to obtain high accuracy measurements on key battery parameters. The board features an 8-pin standalone CAN transceiver to interface with others modules. Very high EMC robustness and performances are achieved by the Freescale MC33901 CAN High-Speed Transceiver. For cell balancing function and general purpose switches, the board features the Freescale MC33879 Configurable Octal Serial Switch.
The design is useful to automotive applications such as engine management, climate controls, communications and safety systems. The circuits function is suitable for a hybrid electric vehicle which monitors the condition of individual cells which make up the battery and maintains all the cells within the operating limits. It also provides information on the state of charge (SOC) and state of health (SOH) of the battery.