IDP782 J1939 harness
Created: Oct 19, 2017
-
- 1309
- 0
- 0
- 0
Description
No description available.
Summary
The Si1102EK uses a Silicon Laboratories Si1102 to measure infrared proximity. The Si1102 strobes an infrared LED at a frequency defined by the potentiometer labeled R2. The Si1102 measures the amount of infrared light that reflects onto the Si1102 package. If the reflected light magnitude exceeds a threshold set by the potentiometer labeled R1, the Si1102’s PRX output pin latches low, which turns on the blue LED labeled D2. The board is powered by a CR2032 battery, which can be connected and disconnected using the switch labeled S1. Header H1 provides access to the Si1102's pins.