Reaction Timer
Created: Feb 24, 2014
-
- 2322
- 0
- 0
- 2
Description
No description available.
Summary
This circuit uses a timer to generate pulses at a 5-ms clock rate. The pulses are shifted into the shift register, one at a time, lighting an LED. An auxiliary timer that generates one pulse per second is used to generate timing to activate the “go" LED and start the 5 ms pulses clocking into the registers. At the GO signal each player presses his buttons (S3 or S4). The delay (reaction time) is read out on LED 4 to LED 17; after six seconds, the sequence repeats.
Details
Components:
- No components added
Tags:
Application:
Type:
Document Support:
- None